(6) Kammprofile Gasket to JPI(ANSI/ASME) raised face flange

Products (VALQUA No.) Product Dimension Standard Applicable Flange Standard
Kammprofile Gasket
6540HP
VALQUA Standard JPI-7S-15
ANSI/ASME B16.5
1.1.33
Table 1.1.33 
Nominal Dia Serrated Part Wing
A B ID
D1
OD
D2
Thickness
T
OD
D3
Thickness
Class
150
Class
300
15 1/2 21.8 31.8 2.0 47.8 54.1 (1.0)
20 3/4 29.6 39.6 2.0 57.2 66.8 (1.0)
25 1 34.8 46.8 2.0 66.8 73.2 (1.0)
32 1 1/4 45.5 59.5 2.0 76.2 82.6 (1.0)
40 1 1/2 50.8 68.8 2.0 85.9 95.2 (1.0)
50 2 66.9 84.9 2.0 104.9 111.3 (1.0)
65 2 1/2 79.6 97.6 2.0 124.0 130.3 (1.0)
80 3 101.6 119.6 2.0 136.7 149.4 (1.0)
90 3 1/2 114.3 132.3 2.0 161.9 165.1 (1.0)
100 4 124.4 148.4 2.0 174.8 181.1 (1.0)
125 5 151.8 177.8 2.0 196.8 215.9 (1.0)
150 6 183.6 209.6 2.0 222.2 251.0 (1.0)
200 8 231.7 263.7 2.0 279.4 308.1 (1.0)
250 10 279.5 317.5 3.0 339.9 362.0 (2.0)
300 12 336.6 374.6 3.0 409.7 422.4 (2.0)
350 14 368.4 406.4 3.0 450.8 485.9 (2.0)
400 16 418.6 462.6 3.0 514.4 539.8 (2.0)
450 18 482.0 526.0 3.0 549.4 596.9 (2.0)
500 20 526.8 576.8 3.0 606.6 654.0 (2.0)
550 22 584.0 634.0 3.0 660.4 704.8 (2.0)
600 24 634.8 684.8 3.0 717.6 774.7 (2.0)

【Note】
1. t is reference dimension.
2. VALQUA dimension in this table is defined to replace asbestos joint sheet.

   



back