O-Ring

no image
VALQUA No.
5640
Product name
Silicone Rubber O-ring Dynamic Application
Shape
O-RING
O-RING
Features1
Highly versatile (Basic)
Features2
It rolls, twists
Features3
In general, the product is not suitable for dynamic application (suitable for open/close)
Inventory status
Manufacturable product

Standard size
・JIS B 2401・AS 568 〄
・ISO/R 1799 (航)
Type
Squeeze

Application classification
Common use
Pressure classification
None
Standard material
Usage location Material name Material No.

Subject to JISB2401

Non-standard quality of material (adaptable material)

Non-standard materials are subject to the material selection criteria

Sealing direction
Flat surface Cylinder Cylindrical piston Cylindrical rod
- -
Size
JIS sizes P series is applied

■ Product content and main applications

Product content
Silicone rubber material is molded into a ring shape with an O-shaped cross section.
Main applications
It is used as a static seal which requires a wide range of service temperatures, from low to high temperatures.

■ Service temperature range

Rubber material Service temperature range

Service temperature is subject to the material selection criteria

■ Operating pressure, pressure direction and pressure types

Pressure Pressure (with back-up ring) Pressure direction
14MPa Spiral: 34.3MPa Bi-directional
One-cut, endless: 49MPa

Pressure types
shock, surge, pulse, vacuum
They can be all accommodated

■ Motions and strokes applied

For fixing -
Reciprocating
Rotating ×~△
Helical
Opening and shutting
Sliding ×
Oscillating -
Stroking
Stroking is not specified; however, a short stroke could cause a lack of lubrication.

■ Fluid, speed and PV value

Liquid
Gas
Fine particle ×
General dust -
Oil film -
Speed
0.04~1.0m/sec
PV Value
-

Lubrication, mountability, sliding resistance, compression resistance, eccentricity/inclination, conformance

Lubrication
Needed
Mountability
Excellent
Sliding resistance
and compression resistance
Average
Eccentricity/inclination
and conformance
Average


■ Cross-section dimensions and design precautions

・Cross-section dimensions

Φ1.9


・Design precautions

■ Case examples of defects and countermeasures

■ FAQ


戻る