U-Packing

no image
VALQUA No.
2060-MLP(HNBR)
Product name
Custom-Made Synthetic Rubber Molded Product U-Packing
Shape
U-PK asymmetrical edge lip(P)
U-PK asymmetrical edge lip(P)
Features1
For hydraulic use
Features2
Exclusive for piston seal application
Features3
Low resistance
Inventory status
Products that are made based on the orders received

Standard size
JOHS-110
Type
Lip

Application classification
For pistons
Pressure classification
High pressure (MIL)
Standard material

none

Non-standard quality of material (adaptable material)
Usage location Material name Material No.
Main part HNBR B5290

Sealing direction
Flat surface Cylinder Cylindrical piston Cylindrical rod
- - ○ Exclusive -
Size
Piston: φ40 to 330
Actual: over φ1000

■ Product content and main applications

Product content
Polyurethane rubber material is molded into a ring shape with a U, J and L-shaped cross section.
Main applications
It is used as a seal for various types of hydraulic machinery from -20 to 100℃. Especially appropriate for hydraulic cylinder packing that needs high-pressure and abrasion-resistant properties.

■ Service temperature range

Rubber material Service temperature range
HNBR -20℃ ~ 100℃

■ Operating pressure, pressure direction and pressure types

Pressure Pressure (with back-up ring) Pressure direction
21MPa 34.3~68.6MPa One-side pressure
Differs by material and cross-section

Pressure types
shock, surge, pulse, vacuum
They can all be accommodated

■ Motions and strokes applied

For fixing -
Reciprocating
Rotating ×~△
Helical
Opening and shutting ×
Sliding ×
Oscillating -
Stroking
Stroking is not specified; however, a short stroke could cause a lack of lubrication.

■ Fluid, speed and PV value

Liquid
Gas
Fine particle
General dust -
Oil film -
Speed
0.04~1.0m/sec
PV Value
-

Lubrication, mountability, sliding resistance, compression resistance, eccentricity/inclination, conformance

Lubrication
Needed
Mountability
Fair
Sliding resistance
and compression resistance
Low
Eccentricity/inclination
and conformance
High


■ Cross-section dimensions and design precautions

・Cross-section dimensions

3.5W


・Design precautions

Acceptable as long as it is designed based on design criteria

■ Case examples of defects and countermeasures

■ FAQ


戻る