U-Packing

no image
VALQUA No.
TE9625-UHS
Product name
Synthetic Rubber Molded Product U-Packing
Shape
U-PK symmetrical edge lip
U-PK symmetrical edge lip
Features1
For hydraulic use
Features2
Common application for rod seal and piston seal
Features3
Low resistance
Inventory status
Manufacturable product

Standard size
 
Type
Lip

Application classification
Common use
Pressure classification
Medium pressure
Standard material
Usage location Material name Material No.
Main part TPU R5990

Non-standard quality of material (adaptable material)

Sealing direction
Flat surface Cylinder Cylindrical piston Cylindrical rod
- -
Size
Standard: φ11.2 to 150
Actual: over φ1000

■ Product content and main applications

Product content
Polyurethane rubber material is molded into a ring shape with a U, J and L-shaped cross section.
Main applications
It is used as a seal for various types of hydraulic machinery from -20 to 80℃. Especially appropriate for hydraulic cylinder packing that needs high-pressure and abrasion-resistant properties.

■ Service temperature range

Rubber material Service temperature range
TPU -20℃ ~ 80℃

■ Operating pressure, pressure direction and pressure types

Pressure Pressure (with back-up ring) Pressure direction
21MPa 34.3~44.1MPa One-side pressure
Differs by material and cross-section

Pressure types
shock, surge, pulse, vacuum
They can all be accommodated

■ Motions and strokes applied

For fixing -
Reciprocating
Rotating ×~△
Helical
Opening and shutting ×
Sliding ×
Oscillating -
Stroking
Stroking is not specified; however, a short stroke could cause a lack of lubrication.

■ Fluid, speed and PV value

Liquid
Gas
Fine particle
General dust -
Oil film -
Speed
0.04~1.0m/sec
PV Value
-

Lubrication, mountability, sliding resistance, compression resistance, eccentricity/inclination, conformance

Lubrication
Needed
Mountability
Fair
Sliding resistance
and compression resistance
Low
Eccentricity/inclination
and conformance
High


■ Cross-section dimensions and design precautions

・Cross-section dimensions

3.5W


・Design precautions

Use an asymmetrical type when the application for the piston or rod is known.

■ Case examples of defects and countermeasures

■ FAQ


戻る