Various Molded Gland Packing

no image
VALQUA No.
7740-BPL (BR:FKM)
Product name
Custom-Made Slipper Seal
Shape
BPL
BPL
Features1
Seal for rotating/reciprocating motion
Features2
Stick-slip is hard to occur.
Features3
Low resistance, no need for mold
Inventory status
Products that are made based on the orders received

Standard size
O-ring: JIS B 2401P Series
Type
Squeeze

Application classification
For pistons
Pressure classification
Oil hydraulic (Medium pressure)
Standard material

none

Non-standard quality of material (adaptable material)
Usage location Material name Material No.
BR FKM D0270, Aflas
Sliding ring 3U8, HPPE

Sealing direction
Flat surface Cylinder Cylindrical piston Cylindrical rod
- - ×
Size
Applicable to JIS-P series (However, it must be from φ2.4)

■ Product content and main applications

Product content
VALFLON seal ring combined with various synthetic rubber back rings. Coefficient of friction is extremely low because of fluororesin used as a slider.
Main applications
It is used as a compact seal with excellent sealing performance for pistons under a wide range of pressures and temperatures.

■ Service temperature range

Rubber material Service temperature range
FKM -10℃ ~ 150℃

■ Operating pressure, pressure direction and pressure types

Pressure Pressure (with back-up ring) Pressure direction
20.6MPa Basically not used Bi-directional
-

Pressure types
shock, surge, pulse, vacuum
They can all be accommodated.

■ Motions and strokes applied

For fixing -
Reciprocating
Rotating
Helical
Opening and shutting ×
Sliding
Oscillating -
Stroking
Stroking is not specified; however, a short stroke is acceptable.

■ Fluid, speed and PV value

Liquid
Gas
Fine particle ×
General dust -
Oil film -
Speed
0.01~1m/s
PV Value
-

Lubrication, mountability, sliding resistance, compression resistance, eccentricity/inclination, conformance

Lubrication
Needed ※1
Mountability
Fair
Sliding resistance
and compression resistance
Low
Eccentricity/inclination
and conformance
Average

*1 Usable even in poor lubrication condition (However, PTFE for non-lubrication must be used.)

■ Cross-section dimensions and design precautions

・Cross-section dimensions

3W


(φ2.4)

・Design precautions

Due to its partial contact, caution is needed for an instability associated with the O-ring rolling movement.
Oil groove machining must be done for rotation.

■ Case examples of defects and countermeasures

■ FAQ


戻る