Mold Various

no image
VALQUA No.
5060
Product name
Silicone Rubber Molded Product Side U-A・B Shape
Shape
Side U-A・B Shape
Side U-A・B Shape
Features1
Low compressive force
Features2
A high compression rate can be achieved.
Inventory status
Products that are made based on the orders received

Standard size
　
Type
Lip

Application classification
Flat surface
Pressure classification
Up to low pressure
Standard material
Usage location Material name Material No.
Main part EPDM H0165
CR - J0070

Non-standard quality of material (adaptable material)

Non-standard materials are subject to the material selection criteria

Sealing direction
Flat surface Cylinder Cylindrical piston Cylindrical rod
○ × - -
Size
Small diameter NG
(The cross-section is predetermined.)

■ Product content and main applications

Product content
Silicone rubber material is molded into specified shapes.
Main applications
Used as heat-resistant/ electric-insulating packing and gasket for -60 to 250 ℃.

■ Service temperature range

Rubber material Service temperature range
－ －
Click here for the list of rubber materials

The service temperature is subject to the material selection criteria.

■ Operating pressure, pressure direction and pressure types

Pressure Pressure (with back-up ring) Pressure direction
14MPa Spiral: 34.3MPa One-side pressure
One-cut, endless: 49MPa

Pressure types
shock, surge, pulse, vacuum		 They can all be accommodated.

■ Motions and strokes applied

For fixing ○
Reciprocating -
Rotating -
Helical -
Opening and shutting -
Sliding -
Oscillating -
Stroking
-

■ Fluid, speed and PV value

Liquid -
Gas -
Fine particle -
General dust -
Oil film -
Speed
-
PV Value
-

Subject to the material selection criteria

■ Lubrication, mountability, sliding resistance, compression resistance, eccentricity/inclination, conformance

Lubrication
-
Mountability
Excellent
Sliding resistance
and compression resistance
Low
Eccentricity/inclination
and conformance
High


■ Cross-section dimensions and design precautions

・Cross-section dimensions

9W×8HＷ


Minimum: Based on 2.4
(Based on LIP)

・Design precautions

Pay attention to the size, etc. since the cross-section is predetermined.

■ Case examples of defects and countermeasures

■ FAQ

‣FAQ about high performance elastomer is here
 ‣FAQ about the elastomer is here

戻る