This is a rolled or rod-shaped material in which compaction molding has been performed on fluororesin.

This is a plate material in which compaction molding has been performed on fluororesin.

This is a material in which compaction molding or extrusion molding has been performed on fluororesin.

This is a material in which fluororesin is mixed with various fillers.

Coil packing made of expanded graphite yarn and braided into a square cross section. These are ideal for high temperature, high pressure valves and are used in combination with adapter packing.

Sheet Gasket that is flexible and high in strength, with fluororesin in a mesh-like structure.

Solid tape in which a fluororesin block has been cut.

Fluororesin tape with high tensile strength and high insulation properties.

Tape in which a single side or both sides have been chemically treated.

Unbaked tape in which a calendaring process has been performed on fluororesin.

This is a fluororesin tape with a heat-resistant adhesive agent applied.

This is a tape with cross-linked PTFE.

This is a plate material with thermocompression bonding and lamination of PI film.

This is a tape of glass cloth impregnated with PTFE.

This is a fabric with a heat-resistant adhesive agent applied.

It is made into a thin wall tube by a paste extrusion process.

Resin is extruded using special forms such as multi-hole.

PEEK resin is processed into a heat-shrinkable tube.

Fluororesin is processed into a heat-shrinkable tube.

This is a processed product in which fluororesin has been cut into a bellows-like shape.

This is a part in which fluororesin is cut into a designated shape, reformed and molded.

This is a bearing, skid in which filler-contained fluororesin is cut into a designated shape.

This is a bearing, skid in which filler-contained fluororesin is cut into a designated shape.

This is a ring that supports sealing by preventing the protrusion of the O-ring.

This is a nozzle that effectively performs washing inside of a tank.

We will introduce a wide variety of processed products and general injection molded products.

They are screws, bolts and nuts made of PFA resin.

This is a steel pipe with PTFE or PFA lining.

This is used for operating area pipes, absorbing pipe axial difference and absorbing expansion and contraction.

This is used for absorbing pipe line axial difference and absorbing expansion and contraction.

This is used for supplying and discharging a chemical solution into towers and tanks.

This is used for storing and transporting a chemical solution.