U-Packing

no image
VALQUA No.
2060-UNR(HNBR)
Product name
Custom-Made Synthetic Rubber Molded Product U-Packing
Shape
U-PK asymmetrical edge lip(R)
U-PK asymmetrical edge lip(R)
Features1
For hydraulic use
Features2
Exclusive for rod seal application
Features3
Low resistance
Inventory status
Products that are made based on the orders received

Standard size
 
Type
Lip

Application classification
For rods
Pressure classification
High pressure
Standard material

none

Non-standard quality of material (adaptable material)
Usage location Material name Material No.
Main part HNBR B5290

Sealing direction
Flat surface Cylinder Cylindrical piston Cylindrical rod
- - - ○ Exclusive
Size
Rod: φ18~280
Actual: over φ1001

■ Product content and main applications

Product content
Polyurethane rubber material is molded into a ring shape with a U, J and L-shaped cross section.
Main applications
It is used as a seal for various types of hydraulic machinery from -20 to 100℃. Especially appropriate for hydraulic cylinder packing that needs high-pressure and abrasion-resistant properties.

■ Service temperature range

Rubber material Service temperature range
HNBR -20℃ ~ 100℃

■ Operating pressure, pressure direction and pressure types

Pressure Pressure (with back-up ring) Pressure direction
21MPa Differs by material and cross-section 34.3 to 68.6MPa One-side pressure
-

Pressure types
shock, surge, pulse, vacuum
They can all be accommodated

■ Motions and strokes applied

For fixing -
Reciprocating
Rotating ×~△
Helical
Opening and shutting ×
Sliding ×
Oscillating -
Stroking
Stroking is not specified; however, a short stroke could cause a lack of lubrication.

■ Fluid, speed and PV value

Liquid
Gas
Fine particle ○ (Make adjustments)
General dust -
Oil film -
Speed
0.04~1.0m/sec
PV Value
-

Lubrication, mountability, sliding resistance, compression resistance, eccentricity/inclination, conformance

Lubrication
Needed
Mountability
Fair
Sliding resistance
and compression resistance
Low
Eccentricity/inclination
and conformance
High


■ Cross-section dimensions and design precautions

・Cross-section dimensions


・Design precautions

Acceptable as long as it is designed based on design criteria

■ Case examples of defects and countermeasures

■ FAQ


戻る