Metal Jacketed Gasket
Metal Jacketed Gasket is composed of carefully selected cushion materials such as non-asbestos millboard, ceramic fiber, compressed non-asbestos sheet and PTFE sheet with external metal jacket of carbon steel, stainless steel, copper, etc. They are widely used on piping flanges, joints of machinery and heat exchangers because they can be fabricated not only to a regular round shape but also to other irregular shapes such as oval, rectangular, etc. with additional partition or partitions to seal multi-pass heat exchangers. An increased demand has recently been seen for a special type having attached expanded graphite tapes on both sealing faces to increase sealability.

- VALQUA No.
- N520
- Product name
- Metal Jacketed Gasket (Flat, double jacketed)
- Features1
- These are flat metal jacketed Gaskets whose core is made of non-asbestos millboard and covered with two metallic sheets on its outside.
- Applicable fluids
- Water, Sea water, Hot water, Steam,Crude oil, Alcohol, Animal & vegetable oil, Heat transfer oilGeneral solvent, Weak acid, Weak alkali,Air, Nitrogen gas, Inert gas,Exhaust gas,など
- Inappropriate fluid
- Application
- Dimensions
- Any forms are available. As for dimensions, products with a maximum diameter of about 3,000 mm can be manufactured, while still larger ones may also be fabricated at site upon request. It is also possible to manufacture highly reliable products with minimized junctions of cores of gasket (patented manufacture) to be used for heat exchangers and the like. Further information in this regard is available.
- Type
- Remarks
- Gasket paste (seal paste or No.6M) shall be used in principle. Flange surface shall be finished as 1.6a.